Marine Grade 5052 Aluminum Tread Plate for Ship Deck
The deck is an important part of the hull. It is a plane structure above the inner bottom of the ship structure, used to cover the inner space of the ship and divide it horizontally into layers. . The number of decks depends on the size of the ship, depending on the type, mission and main dimension. Usually small ships have 1 to 3 layers; medium ships have 3 to 5 layers; large ships have 5 to 10 layers.
The marine grade aluminum 5052 is often used for the ship deck, especially 5 bar aluminum tread plate. This aluminum checker plate is with rich patterns being calendered on the aluminum plate, which can have excellent anti-skid effect when applied on the deck. At the same time alu 5052 has excellent corrosion resistance.
5052 5 bar aluminum tread plate is a typical aluminum floor plate. It is of high hardness, high tensile strength, good rust prevention effect, having obvious advantages in similar products. In corrosive occasions, it has better performance on ships, vehicles, and working platforms, and has great advantages over 1060 aluminum tread plate.
5052 aluminum plate after surface embossing is also the best material for spiral staircases, pedals, refrigerated vehicle walls and floors on large ships. It has excellent processing performance, good electroplating and weldability, and medium strength. In addition to the 5 bar pattern, there are also other patterns such as two bar, three bars and diamond.
Haomei aluminum tread plate is of accurate geometric size, high surface gloss and strong anti-corrosion performance. Besides 5052 aluminum tread plate, we also have 5083 and 5754 aluminum checker plate for the ship deck. Welcome to leave message below to tell us your need.
Original Source:https://www.marinealu.com/a/marine-grade-5052-aluminum-tread-plate-for-ship-deck.html
Tags: marine grade aluminum 5052 , 5 bar aluminum tread plate , alu 5052 ,